Barbed Wire
Double Wire Reverse Twist Hot Dip Galvanized Barbed Wire 2mm Wire 50m Long
products specification
| Material | Mild steel |
| Finish | Hot Dipped Galvanized |
| Wire Construction | Double Stranded Wire |
| Length/Roll | 100m/150m/Roll or customized |
| Main Wire Diameter (Gauge) | 2.2mm(standard)/2.5mm/2.8mm |
| Barb Spacing | 10.2cm |
| Colour | Grey |
| Weight/roll | 10KG/15KG |
| Dimension/Roll with 100 meters | 25cm*25cm*30cm |
| Dimension/Roll with 150 meters | 30cm x 30cm x 30cm |
| Accurate Zinc Coating | Yes |
Features
1. 4-Point Sharp Spikes
Our barbwire is double stranded wire and is made of thick hot dip galvanized steel wire, The 4-Point Sharp Spikes are attached at regular intervals of 10 cm and the spikes is about 4cm long. It is not easy to rust, it is very stable and durable. Long service life up to 20 years above.
2. Hot-dip galvanized barbed wire
This barbed wire is made of hot dipped galvanized wire, thanks to the galvanization, it is not easy to rust, high anti-corrosion and the wire is very stable and durable. The barb wire roll is particularly tensile and break-resistant, so it offers perfect safety protection.
3. DIY Customization
This barbed wire roll is light and easy to bend, It can be used to make crafts at home or outdoors. The Barb wire has many application such as for art, craft, frame, jewelry, furniture, wreaths, lighting. Supplied as 100m / 150m / 200m coil.
Application
As a wire obstacle, it is a major feature of the fortifications in trench warfare.
The barbed wire fence can be used in farms, gardens, courtyards, as the private property fence or protect the plants and trees, etc, you can repair them with the barbed wire. With the deterrent effect of the barbed wire fence can prevent the unwanted intruders from entering.
Installation on Barbed Wire
Step 1:
Make sure you are equipped with protective eyewear, rubber gloves, boots, and clothing that prevents serious injury with a partner to make the job safer and easier.
Step 2:
Place the posts approximately 2 meters apart from each other. Making 1/3 of the post height below ground level. Make sure the posts are properly cemented into the ground before stretching the wire.
Step 3:
Mark the position of each wire on the post. You can also mark the middle post at the same height as the corner and starting point to make your job easier.
Step 4:
Starting at the bottom, attach the first strand of wire to the starting line at the appropriate height. Wrap the wire around the post, twist it back, and wrap it around yourself 4-5 times to maintain tension. Carefully begin to unroll the wire until you reach the corner/end post.
Step 5:
Use iron wire or special fasteners to firmly fix the netting on the support.
Adjust the installed netting to ensure that it is smooth and tight.
Check all connection points to ensure that they are firm and reliable without loosening.
